Watt Cycles

Products, Info and Help => Batteries & Chargers => Product Showcase => Topic started by: Tom Cole on November 04, 2016, 07:57:04 am

Title: Wattcycles Tube Battery - Open Source Project - 3D print and CAD files included
Post by: Tom Cole on November 04, 2016, 07:57:04 am
The attached zip folder contains 3d printable files, Fusion360 CAD files and (incomplete) instructions to make a 36V 10S4P electric bicycle battery pack using 18650 batteries that actually measure 18mm dia.  A video and further instructions will follow later as I do a redesign for slightly larger diameter 18650 batteries.

This project is open source.  The files are free to print and you may sell the prints and completed battery packs using this project and it's files.  You MAY NOT sell the files.  All I ask for my efforts is that you include "Wattcycles Tube Battery" in the name and that you mention wattcycles.com as the source.

Update 11/8/16 I added the Fusion360 files so you can edit as you need and added some comments in the instructions based on my own completed battery experience.

Everything in and/or about this project is "use at your own risk."
Title: Re: Watcycles Tube Battery - Open Source Project 3D print files attached
Post by: Tom Cole on November 04, 2016, 08:01:50 am
More pics here:  http://www.wattcycles.com/index.php?topic=88.0
Title: Re: Wattcycles Tube Battery - Open Source Project - 3D print and CAD files included
Post by: Tom Cole on November 09, 2016, 01:19:41 pm