Author Topic: Teasers of a battery I'm designing.  (Read 8583 times)

Offline Tom Cole

  • Administrator
  • Jr. Member
  • *****
  • Posts: 97
  • Karma: +0/-0
    • View Profile
Teasers of a battery I'm designing.
« on: October 24, 2016, 02:24:38 pm »
The idea is to hold groups of 18650 batteries securely inside a tube with a little breathing room between the batteries allowing for wires and such.  This group of 8 will fit into a 2.5" OD piece of tubing.  This is only a prototype.
« Last Edit: October 30, 2016, 07:20:08 am by Tom Cole »


36V Amped rear gear motor on a 2016 700c Diamondback Trace
Wattcycles on  Facebook


Offline Tom Cole

  • Administrator
  • Jr. Member
  • *****
  • Posts: 97
  • Karma: +0/-0
    • View Profile
Re: Teasers of a battery I'm designing.
« Reply #1 on: October 30, 2016, 07:37:11 am »
Further prototypes. You can see how they will be wired together and how they fit into a 3"IPS PVC pipe.  The model on the right in the first 2 pics is an earlier prototype.  I am cutting away an area for the BMS as well as reducing the amount of plastic to reduce print time.  This battery will be a 10S4P setup using NCR18650GA cells yielding a 36V 14Ah battery with a 40A max continuous discharge rate.  Total length will be 33cm or a little longer than the length of 5 batteries.

I am designing this using Fusion 360, sending the .stl file to Slic3r 3D and printing on my Prusa i3 MK2 3D printer.
36V Amped rear gear motor on a 2016 700c Diamondback Trace
Wattcycles on  Facebook

Offline Tom Cole

  • Administrator
  • Jr. Member
  • *****
  • Posts: 97
  • Karma: +0/-0
    • View Profile
Re: Teasers of a battery I'm designing.
« Reply #2 on: November 02, 2016, 08:16:03 am »
Further model changes...getting closer!
36V Amped rear gear motor on a 2016 700c Diamondback Trace
Wattcycles on  Facebook

Offline Tom Cole

  • Administrator
  • Jr. Member
  • *****
  • Posts: 97
  • Karma: +0/-0
    • View Profile
Re: Teasers of a battery I'm designing.
« Reply #3 on: November 04, 2016, 08:00:46 am »
This project is done and available here for free: http://www.wattcycles.com/index.php?topic=90.0
36V Amped rear gear motor on a 2016 700c Diamondback Trace
Wattcycles on  Facebook